TLV150HES2

Engineered Items :

Yes

LTL Only :

Yes

Sort :

22.0

SKU :

TLV150HES2

LogoImage :

L/Logo_TRENTON.jpg

Branch Pickup Only :

No

Voltage :

208-240/1

longDescription :

The TLV hot gas defrost low velocity unit coolers can be applied in lower temperature 28°F to 34°F rooms. The hot gas defrost units include corrosion proof incoloy sheathed heaters on individual drain pan assemblies preventing re-freezing of condensate water during defrost cycles. Factory installed side outlet distributor and Thermodisc type fan delay thermostats are standard. Check valves are supplied loose for TX valve by-pass. Units are suitable for reverse cycle, three pipe, and ThermoSaver™ hot gas defrost applications.
HE= 3 Pipe Defrost
RE= Reverse Cycle Defrost
TE= Thermosaver Defrost

Vendor Name:

Trenton Refrigeration Products

Motor Type :

PSC

Web Search :

evaporator walkin walk in

manufacturerName :

Trenton Refrigeration Products

Heater Amps :

2.5

Specials :

No

Comments :

3 Pipe Defrost, Electric Heated Drain Pan

Number of Motors :

2

Heater Watts :

580

Weight :

223.0 lb

Web Description :

Unit cooler, walk-in, low velocity, hot gas defrost, 3-pipe, 15000 BTUH 20°F ET, 208-230/1/60 volt, 14-15/16" H x 28-1/8" W x 66-7/8" L

CFM :

2000

Connection Type :

ODS

Specials Description :

Unit cooler, walk-in, low velocity, hot gas defrost, 3-pipe, 15000 BTUH 20°F ET, 208-230/1/60, 14 15/16" H x 28 1/8" W x 66 7/8" L

URI Part Number:

TLV150HES2

Length (In.):

66 7/8

Width (In.):

28 1/8

Height (In.):

14 15/16

Connection Size Inlet (In.):

1/2

Connection Suction (In.):

1 1/8

MCA (Amps):

2.7

Shipping Weight (Lbs):

223.00

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

223.00

The TLV hot gas defrost low velocity unit coolers can be applied in lower temperature 28°F to 34°F rooms. The hot gas defrost units include corrosion proof incoloy sheathed heaters on individual drain pan assemblies preventing re-freezing of condensate water during defrost cycles. Factory installed side outlet distributor and Thermodisc type fan delay thermostats are standard. Check valves are supplied loose for TX valve by-pass. Units are suitable for reverse cycle, three pipe, and ThermoSaver™ hot gas defrost applications.
HE= 3 Pipe Defrost
RE= Reverse Cycle Defrost
TE= Thermosaver Defrost