TLV150RES1

Voltage :

115/1

Engineered Items :

Yes

LTL Only :

Yes

LogoImage :

L/Logo_TRENTON.jpg

Branch Pickup Only :

No

Comments :

Reverse Cycle Defrost, Electric Heated Drain Pan

longDescription :

The TLV hot gas defrost low velocity unit coolers can be applied in lower temperature 28°F to 34°F rooms. The hot gas defrost units include corrosion proof incoloy sheathed heaters on individual drain pan assemblies preventing re-freezing of condensate water during defrost cycles. Factory installed side outlet distributor and Thermodisc type fan delay thermostats are standard. Check valves are supplied loose for TX valve by-pass. Units are suitable for reverse cycle, three pipe, and ThermoSaver™ hot gas defrost applications.
HE= 3 Pipe Defrost
RE= Reverse Cycle Defrost
TE= Thermosaver Defrost

Vendor Name:

Trenton Refrigeration Products

Sort :

20.0

Motor Type :

PSC

Web Search :

evaporator walkin walk in

Web Description :

Unit cooler, walk-in, low velocity, hot gas defrost, reverse cycle, 15000 BTUH 20°F ET, 115/1/60 volt, 14-15/16" H x 28-1/8" W x 66-7/8" L

manufacturerName :

Trenton Refrigeration Products

Heater Amps :

5

Specials :

No

Number of Motors :

2

Heater Watts :

580

Specials Description :

Unit cooler, walk-in, low velocity, hot gas defrost, reverse cycle, 15000 BTUH 20°F ET, 115/1/60, 14 15/16" H x 28 1/8" W x 66 7/8" L

SKU :

TLV150RES1

Weight :

223.0 lb

CFM :

2000

Connection Type :

ODS

URI Part Number:

TLV150RES1

Length (In.):

66 7/8

Width (In.):

28 1/8

Height (In.):

14 15/16

Connection Size Inlet (In.):

1/2

Connection Suction (In.):

1 1/8

MCA (Amps):

5.2

Shipping Weight (Lbs):

223.00

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

223.00

The TLV hot gas defrost low velocity unit coolers can be applied in lower temperature 28°F to 34°F rooms. The hot gas defrost units include corrosion proof incoloy sheathed heaters on individual drain pan assemblies preventing re-freezing of condensate water during defrost cycles. Factory installed side outlet distributor and Thermodisc type fan delay thermostats are standard. Check valves are supplied loose for TX valve by-pass. Units are suitable for reverse cycle, three pipe, and ThermoSaver™ hot gas defrost applications.
HE= 3 Pipe Defrost
RE= Reverse Cycle Defrost
TE= Thermosaver Defrost