TLV180HES2

Engineered Items :

Yes

LTL Only :

Yes

Weight :

295.0 lb

LogoImage :

L/Logo_TRENTON.jpg

Branch Pickup Only :

No

Voltage :

208-240/1

longDescription :

The TLV hot gas defrost low velocity unit coolers can be applied in lower temperature 28°F to 34°F rooms. The hot gas defrost units include corrosion proof incoloy sheathed heaters on individual drain pan assemblies preventing re-freezing of condensate water during defrost cycles. Factory installed side outlet distributor and Thermodisc type fan delay thermostats are standard. Check valves are supplied loose for TX valve by-pass. Units are suitable for reverse cycle, three pipe, and ThermoSaver™ hot gas defrost applications.
HE= 3 Pipe Defrost
RE= Reverse Cycle Defrost
TE= Thermosaver Defrost

Vendor Name:

Trenton Refrigeration Products

Heater Watts :

820

Motor Type :

PSC

Specials Description :

Unit cooler, walk-in, low velocity, hot gas defrost, 3-pipe, 18000 BTUH 20°F ET, 208-230/1/60, 14 15/16" H x 28 1/8" W x 92 7/8" L

Web Search :

evaporator walkin walk in

CFM :

2530

manufacturerName :

Trenton Refrigeration Products

Specials :

No

Comments :

3 Pipe Defrost, Electric Heated Drain Pan

Web Description :

Unit cooler, walk-in, low velocity, hot gas defrost, 3-pipe, 18000 BTUH 20°F ET, 208-230/1/60 volt, 14-15/16" H x 28-1/8" W x 92-7/8" L

SKU :

TLV180HES2

Heater Amps :

3.6

Sort :

28.0

Number of Motors :

3

Connection Type :

ODS

URI Part Number:

TLV180HES2

Length (In.):

92 7/8

Width (In.):

28 1/8

Height (In.):

14 15/16

Connection Size Inlet (In.):

1/2

Connection Suction (In.):

1 1/8

MCA (Amps):

2.7

Shipping Weight (Lbs):

295.00

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

295.00

The TLV hot gas defrost low velocity unit coolers can be applied in lower temperature 28°F to 34°F rooms. The hot gas defrost units include corrosion proof incoloy sheathed heaters on individual drain pan assemblies preventing re-freezing of condensate water during defrost cycles. Factory installed side outlet distributor and Thermodisc type fan delay thermostats are standard. Check valves are supplied loose for TX valve by-pass. Units are suitable for reverse cycle, three pipe, and ThermoSaver™ hot gas defrost applications.
HE= 3 Pipe Defrost
RE= Reverse Cycle Defrost
TE= Thermosaver Defrost