Log in for pricing and inventory.

TXSA010M6T3A

TXSA010M6T3A
Call To Order
Condensing unit, water cooled, semi-hermetic compressor, medium temp, R404A, 1 HP, 208-230/3/60, w/ receiver
Engineered Items :
Yes
LTL Only :
Yes
LogoImage :
L/Logo_TRENTON.jpg
Branch Pickup Only :
No
Oil_short :
POE
longDescription :

Standard Features

  • Weatherproof electrical control box with compressor contactor and fused control circuit
  • Pre-formed piping
  • Solid mounted accessible semi-hermetic compressor (to 2 HP)
  • Spring mounted accessible semi-hermetic compressor with suction and discharge vibration eliminator (3 HP and over)
  • Suction service valve.
  • Copper tubing secured with cushion clamps
  • Coaxial condenser
  • Receiver with fusible plug and liquid shut off valve
  • Adjustable dual high/low pressure control
  • Each unit subjected to a thorough leak test with helium leak-detectors
  • Units are shipped with helium holding charge

Optional Features

  • Suction and discharge vibration eliminator (to 2 HP)
  • Suction accumulator (with or without boil-out coil)
  • Discharge line check valve
  • Oil separator (with or without oil return filter & solenoid valve)
  • Receiver inlet ball valve
  • Over-sized receiver
  • Sealed liquid line filter drier & sight glass
  • Liquid line ball valve (shipped loose)
  • Insulated suction lines
  • Flex hoses for all pressure controls
  • Liquid line solenoid valve (with standard 230 volt coil) shipped loose
  • Compressor circuit breaker
  • Current sensing relay for use with oil safety control (where applicable)
  • Defrost heater contactor with fuse block
  • Evaporator fan contactor with fuse block
  • Disconnect switch
  • Disconnect fusing
  • Pump down toggle switch
  • Lock out control circuit (liquid solenoid valve with separate HP and LP controls)
  • Time delay relay for compressor
  • Mechanical time clock
  • Electronic time clock
  • Electronic defrost kit
  • Electronic voltage/phase monitor
  • Water regulating valve (shipped loose)
Refrigerant :
R404A
Specials Description :
Condensing unit, water cooled, semi-hermetic compressor, medium temp, R404A, 1 HP, 208-230/3/60
Connection Water Type :
ODS
Vendor Name:
Trenton Refrigeration Products
Horsepower :
1
Connection Water Inlet (In.) :
1/2
Receiver Capacity 90 % Full (Lbs.) :
5.2
Web Search :
Volt
Oil :
Polyol Ester
Compressor :
KARA010ETAC
Web Description :
Condensing unit, water cooled, semi-hermetic compressor, medium temp, R404A, 1 HP, 208-230/3/60, w/ receiver
Specials :
No
Sort :
4.0
manufacturerName :
Trenton Refrigeration Products
Voltage :
208-240/3
Weight :
240.0 lb
Connection Type :
ODS
SKU :
TXSA010M6T3A
URI Part Number:
TXSA010M6T3A
Length (In.):
30 3/8
Width (In.):
24 7/8
Height (In.):
16 1/2
Connection Liquid (In.):
3/8
Connection Suction (In.):
5/8
Connection Water Outlet (In.):
1/2
MCA (Amps):
5.4
Receiver Included:
Yes
Shipping Weight (Lbs):
240.00
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weight (Lbs):
240.00

Standard Features

  • Weatherproof electrical control box with compressor contactor and fused control circuit
  • Pre-formed piping
  • Solid mounted accessible semi-hermetic compressor (to 2 HP)
  • Spring mounted accessible semi-hermetic compressor with suction and discharge vibration eliminator (3 HP and over)
  • Suction service valve.
  • Copper tubing secured with cushion clamps
  • Coaxial condenser
  • Receiver with fusible plug and liquid shut off valve
  • Adjustable dual high/low pressure control
  • Each unit subjected to a thorough leak test with helium leak-detectors
  • Units are shipped with helium holding charge

Optional Features

  • Suction and discharge vibration eliminator (to 2 HP)
  • Suction accumulator (with or without boil-out coil)
  • Discharge line check valve
  • Oil separator (with or without oil return filter & solenoid valve)
  • Receiver inlet ball valve
  • Over-sized receiver
  • Sealed liquid line filter drier & sight glass
  • Liquid line ball valve (shipped loose)
  • Insulated suction lines
  • Flex hoses for all pressure controls
  • Liquid line solenoid valve (with standard 230 volt coil) shipped loose
  • Compressor circuit breaker
  • Current sensing relay for use with oil safety control (where applicable)
  • Defrost heater contactor with fuse block
  • Evaporator fan contactor with fuse block
  • Disconnect switch
  • Disconnect fusing
  • Pump down toggle switch
  • Lock out control circuit (liquid solenoid valve with separate HP and LP controls)
  • Time delay relay for compressor
  • Mechanical time clock
  • Electronic time clock
  • Electronic defrost kit
  • Electronic voltage/phase monitor
  • Water regulating valve (shipped loose)
Documents