The W water-cooled condensing unit can be applied where air cooled units are not desirable or space is unavailable. This unit can operate with tower or city water and its size will allow operation in a minimum space; Shell and tube condensers are standard.
Available in sizes from 3/4 Hp to 40 Hp, the unit is complete with high efficiency accessible hermetic compressors.
Standard Features
- Sturdy electrical control box with compressor contactor and fusedcontrol circuit
- Spring mounted, accessible semi-hermetic compressor
- Sealed liquid line filter drier and sight glass (5.0 HP and up)
- Discharge vibration eliminator
- Copper tubing secured with Hydra-Zorb/Cush-A-Clamp
- Shell and tube water cooled condenser with fusible plug or pressure relief valve and liquid shut off valve
- Adjustable dual high/low pressure control
- Oil failure control on all applicable models
- Demand Cooling™ on R22 low temp. models
- Suction and discharge service valve
Optional Features
(Factory Mounted):
Suction accumulator with or without heat exchanger Sealed or replaceable core suction filter with vibration eliminator Oil separator c/w oil return solenoid valve Sealed liquid line filter drier and sight glass (to 5 HP) Replaceable core liquid line filter drier Liquid line solenoid valve w/230 volt coil (shipped loose) Ball valve (shipped loose) Sentronic™ oil failure control Flex hose on all controls Compressor circuit breaker Compressor time delay relay Pump down toggle switch Time clock Defrost contactor with fuse block Evaporator fan contactor with fuse block Fused disconnect Phase/voltage monitor Water valve (shipped loose) Marine duty (cupro-nickel) condenser
Other options available at your request—consult your branch for pricing.