manufacturerName :

IRP

SKU :

418VS

Branch Pickup Only :

No

Specials :

No

Web Description :

Vibration absorber, 4-1/8" OD, 33-3/8" L

manufacturerSKU :

365-0014

Vendor Name:

IRP

Note 1 :

U.L. and C.S.A. approved for low side (suction side) use only.

Maximum Operating Pressure (psi) :

175.0

Specials Description :

Vibration absorber, 4 1/8" OD, 33 3/8" L

LogoImage :

L/Logo_IRP.jpg

Burst Pressure :

525 psi

Weight :

16.0 lb

Sort :

14.0

longDescription :

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping.
Vibration absorbers function best when installed as close to the compressor as possible, and perpendicular to the major vibration direction. For optimum absorption of vibration, the refrigerant line should be anchored at the absorber end furthest from the vibration source.

• Flexible tubing: Corrugated red brass for 1/4"-1 5/8"; corrugated type 321 stainless steel for 2 1/8"-4 1/8"
• Wired braid: Bronze for 1/4"-1 5/8"; type 304 stainless steel for 2 1/8"-3 5/8"
• Ferrules: Copper for 1/4"-1 5/8"; type 304 stainless steel for 2 1/8"-3 5/8"
• Tube ends: Copper

URI Part Number:

418VS

Vendor Part Number:

365-0014

Length (In.):

33.38

Width (In.):

5.00

Height (In.):

5.00

Outside Diameter (In.):

4 1/8

Shipping Weight (Lbs):

16.00

Prop65:

No

Weight (Lbs):

16.00

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping.
Vibration absorbers function best when installed as close to the compressor as possible, and perpendicular to the major vibration direction. For optimum absorption of vibration, the refrigerant line should be anchored at the absorber end furthest from the vibration source.

• Flexible tubing: Corrugated red brass for 1/4"-1 5/8"; corrugated type 321 stainless steel for 2 1/8"-4 1/8"
• Wired braid: Bronze for 1/4"-1 5/8"; type 304 stainless steel for 2 1/8"-3 5/8"
• Ferrules: Copper for 1/4"-1 5/8"; type 304 stainless steel for 2 1/8"-3 5/8"
• Tube ends: Copper