Catalog pricing shown. Please log in to see your pricing.

ES140D3-T3-Z

ES140D3-T3-Z
Call To Order
Split system air cooled chiller, scroll compressor, evaporator, dual circuit, 16 HP, use CS140D condenser, 208-230/3/60
Vendor Name:
Drake
URI Part Number:
ES140D3-T3-Z
Length (In.):
65
Width (In.):
30
Height (In.):
39
Shipping Weight (Lbs.):
1400
BTUH at 95°F Amb. 45°F Lwt:
162,000
Compressor Horsepower:
8
Compressor Quantity:
2
Condenser:
CS140D
Fan Motor FLA:
3.3
Fan Motor Qty:
2
LRA:
195.0
MCA (Amps):
80
MOP:
110
Nominal Capacity (BTUH):
162,000
Process Fluid Connection (In.):
1 1/4 FPT
Rated Load Amps:
32.1
Voltage:
208-230/3/60
Weight (Lbs.):
1,400.0

Standard Features

  • ETL listed
  • Remote condenser section
  • Advanced Microprocessor: BMS, BAS communications, remote access, monitoring services
  • Stainless steel brazed plate evaporator with 1/2" insulation and secured in a steel bracket
  • Scroll compressor (digital scroll for -ZD models) with crankcase heater
  • Suction accumulator
  • Water flow switch
  • Hot gas by-pass capacity control on standard scroll models (not -ZD or tandem models)
  • 24V control transformer
  • Direct drive condenser fan motor
  • Rust resistant, high CFM, aluminum condenser fan blade
  • Condenser(s): copper tube/aluminum fin
  • Compressor motor contactor
  • Condenser motor and control circuit fusing
  • Painted galvanized sheet metal cabinet
  • 1/2" insulation on all water and refrigerant lines
  • Liquid line drier, sightglass, solenoid, TEV
  • Full refrigerant charge from factory (not including field piping)

Available Options

  • Remote touchscreen panel
  • 4 year extended compressor warranty
  • Casters (factory mounted)
  • 115 volt (rain tight) sevice outlet
  • Fused disconnect
  • Compressor fusing
  • EC fan motor (s) (+10°F)
  • Flooded condenser with receiver/head pressure control (-20°F)
  • Heated flooded condenser with receiver/head pressure control (-40°F)
  • Factory installed evaporator heat tape freeze protection thermostatically controlled
  • Water pressure gauge set
  • Fused stainless steel with unions and ball valves process pump
  • Dual system pump with manual changeover or autochangeover
  • Low flow bypass valve
  • Electroplated, copper or heresite finned condenser coil (coastal protection)
  • Shell and tube evaporator barrel
  • Water flow meter
  • Auto city water make up solenoid
  • Auto city water changeover panel with 5 micron filter option
  • Special piping for de-ionized and reverse osmosis water systems
Installation Instructions

Specification Sheet